Industrial gates made by Mirola are reliable, they are made of the highest quality materials and ensure comfort and safety of use.
Our offer includes gates of different methods of operation to apply in nearly every type of buildings, from production halls, warehouses, up to fire stations, car workshops and many other facilities.
As standard, each of our gates is equipped with protection against effects of breakage of torsion springs. Moreover, our gates may be additionally equipped with a wicket door that allows entrance into building without the necessity to open the gate; lattice section filled with acrylic glass, providing more lightning for the interior of your investment or lattice sections filled with a panel made of aluminium sheet filled with a foam; ventilation grilles allowing for free air exchange inside a building.
A required height of a heading of an industrial gate with low operation is minimum 240 mm. The minimum width of a jamb is 120 mm (+ 150 mm at the driving side) and the built-in depth must be at least equal to the height of the gate opening + 820 mm.
Product characteristics: shaft and torsion springs installed on the back of double horizontal guides.
Hn: min. 240 mm
b: min. 120 mm (+ 150 mm at the driving side)
W: min. H + 820 mm
Here, you can find information regarding garage doors...
Standard panels used in production of garage gates are comprised of sections of 40 mm thickness and 500 mm, 555 mm or 610 mm height.
They are made of hot-dip galvanised steel sheet coated with polyester, filled with polyurethane foam of high thermal insulation properties.
The design solutions of sections prevent the gate from crushing the user’s fingers.
Panele użyte do produkcji bram garażowych w systemie ThermicGATE składają się z sekcji o grubości aż 60mm oraz wysokości 500 mm. Zbudowane są ze stali galwanizowanej Z100 i Z225 oraz powlekanej poliestrem blachy stalowej, wypełnionej pianką poliuretanową o bardzo dobrych właściwościach termoizolacyjnych.
Rozwiązania konstrukcyjne sekcji zabezpieczają użytkownika bramy przed przygnieceniem palców.
The entire lattice section is made of anodised aluminium profiles. Sections may be filled with acrylic glass, aluminium board filled with a foam and a steel sheet with perforation to improve ventilation in the area (e.g. in underground garages). There is a possibility to coat profiles with any RAL colour.
The majority of industrial sectional gates may be additionally equipped with passage doors made from the same material as the gate sections, i.e. gate panel, lattice sections with acrylic glazing, aluminium board or perforated sheet metal filling.
Integrated doors are available in low and standard doorstep versions. Standard dimensions of a door leaf is 800 mm or 900 mm width and 2 000 mm height. Minimum distance from the door to the side edge is 700 mm.
Each integrated door is equipped with an automatic door closing mechanism that holds the door leaf in a closed position. In case of use of an electrical drive, the door is equipped with an opening sensor, which guarantees that gate lifting is only possible when the door is opened.
The door ring is made of anodised aluminium profiles that may be coated with any RAL colour.
When designing our gates, we put a great emphasis on safety and comfort of use, therefore, gates manufactured by MIROLA feature the highest quality components having all necessary certificates.
All our industrial sectional gates are equipped with protection measures that prevent rapid drop of a gate in case of spring breakage.
Industrial sectional gates, due to the frequency of their use, require additional protection measures. Protection against effects of breakage of the torsion spring prevents rapid drop of the gate in case of breakage of one of the ropes.
FRABA (OSE) System is a photo-optical safety sensor installed in the gasket of the lower panel of the gate. After detecting interruption of a light beam, the sensors immediately stop and then lift the armour of the gate, preventing crushing. The system is compatible with the majority of controls available on the market.
forceLC2 Optical Curtain provides an optical protection of the edges of the gate against crushing and is mounted on the guides. The optical curtain is connected to OSE control socket
A set of pneumatic measures protecting against crushing, mounted on the lower gasket of the gate. The pneumatic limit switch is activated by an increased pressure in the lower gasket. The contact of the limit switch opens when the gasket is crushed by an obstacle.
All standard sections, i.e. with a gate panel, may be equipped with thermal windows that allow to increase lightning level in your garage or hall.
As a producer, we grant 24-month guarantee for our products.
To ensure safe, reliable and comfortable use of our products, we provide repair services and post-guarantee inspections.
We offer pleasant atmosphere, professional advice and assistance in selection of an offer that is most beneficial in terms of technical capabilities.
Our products have all necessary certificates and approvals, which confirms their high quality in terms of implementation of European safety standards.